In this section

Evolis MIFARE card coupler

Which MIFARE Ⓡ contactless card couplers do Evolis printers support?

Magnetic Encoding

How to read and write magnetic cards using an Evolis printer

Changing a Nisca Ribbon

How to change the printing ribbon for Nisca PR5300 / 5350 / 53LE

A3M Plastic Cards > Frequently asked questions >

Frequently asked questions

Evolis printers sensors adjustment


How to synchronise all sensors of an Evolis card printer

For Windows XP, go to the printer driver start==>Configuration==>Faxes and printers. Right click on the name of your Evolis printer, then select Properties.
- Go to Tools.
- Make sure you have a YMCKO colour ribbon inside of the Evolis printer, and at least one card in the card feeder.
- Click Printer Self Adjustment. The printer will begin to auto-adjust. When its lights blink repeatedly, you will need to open the printer cover and close it again. Wait 3 seconds, then take the card feeder out and put it back again.
- The printer will eject a card. Sensors are adjusted.

NOTE: Process valid for Pebble3 and Dualys 2 printers.

Call us

Mon statut

info (@) a3m.eu