Mifare readers/writers

Contactless card readers and writers (encoders) represent the latest technology in terms of data reading and encoding plastic cards.
- Particularly easy to use, no special manipulation is required to read or write a card: just place the card a few centimetres from the reader and the exchange can be realized.
- Very resistant: no physical contact between the card and the reader, so no mechanical wear at all.
- Low cost solutions: their cost has lowered substantially in the past years, and today they are available at prices comparable to those of magnetic stripe readers or smart contact readers.

13,56Mhz technology

- ISO 14443 A: mainly a Philips standard and the most widespread worldwide, particularly in public transportation applications.
Transaction speed: 106Kbps. Max. reading distance 10cm.
Vendors: Philips, Infineon.
- ISO 14443 B: differs from -A standard for its faster exchange rate. Therefore it is preferred for use with microprocessor chips.
Transaction speed: 847Kbps. Max. reading distance 10cm.
Vendors: Inside Contactless, ST Microelectronics.
- ISO 15693: this standard is used for applications where reading distance is the dominant criteria (50 cm approximately).
Transaction speed: 26 Kbps. Max. reading distance 50cm.
Vendors: Texas Instruments, Inside Contactless, Philips Icode SLI.

This category contains 12 posts

A3M Plastic Cards > ID card readers > Mifare readers/writers >

Mifare readers/writers

  • Mifare module with integrated antenna


    OEM module for integration

    LGM3xxxAT is a 13.56Mhz read/write module. It is the ideal device for integrators who need to enable any electronic hardware with a contactless reading interface. Its small footprint makes integration easy and (...) ( Continue Reading…)


  • Mifare read/write module with separate antenna


    OEM module for integration

    The LGM3xxxA Mifare module was developed specifically to answer integrators’ demand for a highly customisable reader to solve the following problems: The electronic module cannot be positioned near the (...) ( Continue Reading…)


  • LM10U Mifare USB reader with keyboard wedge emulation


    An esay to use reader that reads the UID of a Mifare ID card without the need to program

    LM10U makes Mifare badges reading more easy. It just connects to a USB port and send the data read with keyboard emulation: as soon as a Mifare card enters its communication field, it transmits the chip serial (...) ( Continue Reading…)


  • Smart and Mifare USB Reader


    Compact and economical reader that uses Smart contact and contactless interfaces for desktop applications

    LGM2200+ is our new reader in the 2011 range for reading/writing applications of contact smart cards and 12.56MHz RFID contactless smart cards. With its modern and compact design, it is very easy to use and (...) ( Continue Reading…)


  • Desktop Mifare reader-writer


    LGM6xxx: 13.56MHz Mifare contactless cards reader-writer

    A3M LGM6xxx desktop reader family is a contactless smart card read and write device that supports ISO15693, ISO14443A and ISO14443B. It is designed based on a powerful 8-bit Microprocessor to meet a simple and (...) ( Continue Reading…)


  • Fingerprint/Mifare desktop reader


    Desktop Mifare Smart card Read/Write Reader 13.56MHz frequency

    LGMF64X0 is a new generation desktop reader with fingerprint technology and contactless smart card technology. It uses a stable and reliable fingerprint algorithm and scanner with high resolution to achieve (...) ( Continue Reading…)


  • Access Control Door Reader


    13.56Mhz Mifare contactless plastic cards reader writer

    LGM5xxx access control door reader family is a contactless proximity read/write and read only device that supports ISO15693, ISO14443A, ISO14443B and Mifare + EM 125kHz dual frequency ID cards. LGM5xxx is easy (...) ( Continue Reading…)


  • Access control door reader with keypad


    13.56Mhz Mifare contactless plastic cards reader writer with keypad for PIN code security

    LM5xxxB is a door access control reader similar to LGM5xxx. For even more security in your access control system, it also features a keypad for entering PIN codes. ( Continue Reading…)


  • 125KHz and Mifare dual frequency Reader


    Dual Proximity + Mifare reader for access control

    Ideal card reader for companies and administrations that need to use both a previous 125KHz technology with a more modern access control system or time and attendance system based on 13.56MHz Mifare (...) ( Continue Reading…)


  • Mifare reader with LCD and keypad


    Small footprint and high capacity for access control

    LGM5xxx-2B is the latest member in our 5xxx series of contactless 13.56Mhz readers (ISO15693, ISO14443A, ISO14443B). The 2B housing offers integrators with the same capacities as other 5xxx readers (A, B, C (...) ( Continue Reading…)


  • Intelligent Time and Attendance Terminal


    13.56Mhz Mifare contactless cards terminal with keypad and LCD screen

    A3M TLGM86xx intelligent time and attendance family is a contactless smart card read/write and read only device that supports ISO14443A Mifare technology. ( Continue Reading…)


  • Anti-vandal Mifare readers


    High resistance readers with or without keypad

    Our anti-vandal contactless readers share the same electronic base as other readers in the 5xxx family. 1F (with keypad) and 0F (no keypad) readers are A3M’s answer to the need for resistance to physical (...) ( Continue Reading…)