A3M Personal Identification and Access Control Solutions

Rewritable cards

Sabrina Davis — 2018-08-18T18:06:28Z

The A3M rewritable badge has been specially designed to be reused. The same rewritable PVC card can thus be erased and then printed again up to 500 times thanks to products such as the Magicard Pronto card printer or the Evolis Tattoo Rewrite printer. For cost savings and an ecological approach.

- Blank cards / Customer loyalty management

Biodegradable Cards

Sabrina Davis — 2018-08-18T17:53:52Z

Keyholder cards

Webmaster — 2005-04-10T16:22:00Z

The A3M breakable card is a PVC customer card in standard format CR80 with a thickness of 0,76mm. It is detachable pre-cut into three parts of equal dimensions for obtaining identical mini-cards. Thanks to its small size and its attachment to the key ring, this small card has become an inescapable classic of customer loyalty.

- Blank cards / Customer loyalty management

Blank cards

Webmaster — 2005-03-17T20:58:00Z

Specifications of the blank PVC card

Standards and dimensions

ISO Standard	C80 ISO 7810
Dimensions of a PVC card	85.60mm long by 53.98mm wide, rounded corners with a radius of 3.18mm (ID-1 format)
PVC card thickness	According to ISO 7813, 0.76mm
Material of the badge	Generally made of PVC with lamination of a thin heat-receiving layer allowing sublimation printing in a card printer

Recommendations for printing white plastic cards

Be careful about the quality of the plastic cards you buy to print with your card printer. Print on a poor quality card and you can permanently damage the print head or the drive rollers due to poor cutting with sharp edges or dirt embedded in the badge surface. The quality requirement for a magnetic card or barcode printing must be even higher. The contractual warranty of the printers does not cover you in case of use of poor quality consumables, so use the cards of a recognized manufacturer such as A3M.

Magnetic cards

Webmaster — 2005-02-07T20:59:00Z

A ISO 7811 3-track magnetic stripe card. Available in high and low coercivity (HiCo and LoCo). The magnetic card is a card identification technology traditionally widely used. Associated with the bank card, it is still used in identification and access control applications: hotel establishments, loyalty card, parking access. Manufacturer of magnetic cards, A3M guarantees the best manufacturing quality and compliance with the ISO standard which will ensure the proper functioning of the magnetic card in your application.

- Blank cards / ID card encoders